25 HTS-735 II Fluxless Brazing Rods
$59.95
USA ORDERS: Free Shipping
CANADA ORDERS: $19.00 will be added to cover shipping
AUSTRALIA & NEW ZEALAND: $30.00 will be added to cover shipping
As little as one inch of HTS-735 II Fluxless Brazing Rod, can save you hundreds of dollars versus a commercial boat or pontoon aluminum repair job. It’s so simple to use anyone can use it effectively on the very first repair. You get a strong permanent bond, many times stronger than the original metal you are bonding. Try some today. We guarantee 100% complete satisfaction!
Ships same day 1st Class USPS 2-8 days delivery.
Call for faster shipping!
22 reviews for 25 HTS-735 II Fluxless Brazing Rods
Powered by
| 5 star | 81% | |
| 4 star | 9% | |
| 3 star | 9% | |
| 2 star | 0% | |
| 1 star | 0% |
Kyle Roberson (verified owner) –
With a little patience and 2 rods I repaired a nickel sized hole in the side of my jon boat with nothing behind the hole. Fairly easy to work with and holds very strong. Will definitely be a repeat customer
Peter Davis (verified owner) –
We could not fix the gash in our pontoon. I like the product but couldn’t get the pontoon itself hot enough for the solder to take.
Randall Gasser –
Hi Peter, Watch my youtube video DIY Pontoon Repair youtube.com/c/aluminum-weld. In the video I talk about using different torch tips and gases like Map Gas vs Propane. You can also get a helper and use two torches. Also you can always contact me by phone.
Anonymous (verified owner) –
Great product and fast shipping
Pablo Reyna (verified owner) –
Good product
Robert C. (verified owner) –
Kevin B. (verified owner) –
I welded up a cracked rim, mounted a tire on it holds air!
Anonymous (verified owner) –
So far I’m very pleased, started brazing holes in my aluminum boat have more holes to do but the rods have worked very well and seems to have a very strong bond. Very surprised how easy it is to do.
Richard Humphreys (verified owner) –
I used the product to repair the stern of my square back canoe. Worked as advertised with a strong permanent repair. I tried to use it on some leaking rivets, but I had repaired them several years ago with West Systems Aluminum Boat Repair epoxy. When I heated up the rivets the epoxy caught fire, so I decided to seal them again with epoxy. Had I not used the epoxy previously I believe the aluminum brazing rods would have been a better, more permanent repair.
There were problems with the post office losing my original order. When I called to check on it I received courteous and prompt help with a second shipment via priority mail. Tremendous customer service. Highly recommended!
Steve Stewart (verified owner) –
Can’t seem to get the aluminum hot enough with propane to get the material to flow. Working on 18.5ft G3 aluminum boat haul. So I can’t really rate it yet
Steve
Randall Gasser –
Please watch my YouTube video for pontoon repairs. https://www.youtube.com/watch?v=LB8qw-u9XVI&t=573s
I talk about different torch tips and gases. If you have other questions please call me 816-803-1663.
Mark A S. (verified owner) –
Works great, but do not apply the rod to the aluminum under the flame, and make sure the aluminum is very clean. I found there are installations that still require a tig or mig welder, but for small repairs this brazing rod does well.
C James (verified owner) –
Charles (verified owner) –
Good product easy to use
Greg Hoying (verified owner) –
Robert Hutton (verified owner) –
Great customer service, product is the best and the video’s can teach anyone how to use it.
Mike T. (verified owner) –
So far I have used 2 propane torches and they do not get hot enough over 30minutes need to get a heavy duty torch for it to get hot enough I was not using small propane tank. Not sure yet will repost once I get another torch.
Charles (verified owner) –
Good product easy to use
Chad Hedmark (verified owner) –
Very helpful when I called and spoke to you on the phone. Your product worked as advertised and I was a bit surprised it was easier to use than I expected.
claude f. (verified owner) –
Quality product. Makes a strong weld. I would recommend.
DANIEL P. (verified owner) –
I stripped a pontoon boat to find the aluminum angle welded to the bottom of one pontoon had broken loose probably from hitting rocks.I removed and turned pontoon over. Cleaned material with wire wheel on mini grinder. If I had access to my acetylene brazing torch it would have been much easier to fix because pontoon removed so much heat needed in that area. I was able to use a turbo torch but took much longer. As stated in bold text. HEAT THE METAL NOT THE ROD. Once the pontoon area was hot enough I was very pleased with the flow of the aluminum weld product. I did need to hammer the lighter aluminum angle back into shape because it warped with the long heating process with the turbo torch. The “weld” held great with no cracking etc. I believe this is a permanent fix for the pontoon.
Steve Warrington (verified owner) –
I’m a carpenter, not a welder. With your product I was able to repair a tear on my pontoon with ease. Thanks
Anonymous (verified owner) –
Product worked exactly as described! I repaired 30 holes in the bottom of my vintage boat!
Michael Boyce (verified owner) –