8 HTS-735 II Fluxless Brazing Rods
$24.99
USA ORDERS: Free Shipping
CANADA ORDERS: $19.00 will be added to cover shipping
AUSTRALIA & NEW ZEALAND: $30.00 will be added to cover shipping
As little as one inch of HTS-735 II Fluxless Brazing Rod, can save you hundreds of dollars versus a commercial boat or pontoon boat aluminum repair job. It’s so simple to use anyone can use it effectively on the very first repair. You get a strong permanent bond, many times stronger than the original metal you are bonding. Try some today. We guarantee 100% complete satisfaction!
Ships same day 1st Class USPS 2-8 days delivery.
Call for faster shipping!
136 reviews for 8 HTS-735 II Fluxless Brazing Rods
Powered by
| 5 star | 79% | |
| 4 star | 6% | |
| 3 star | 7% | |
| 2 star | 2% | |
| 1 star | 4% |
Showing 107 of 135 reviews (5 star). See all 135 reviews
Mark H. (verified owner) –
Will order again!
Jeremy Fegett (verified owner) –
Eldon Ballenger (verified owner) –
Worked absolutely perfect!!! Only took about a minute to heat up the aluminum on my 10 foot job boat at the hole and the fluxless rod melted/penetrated right into the hole wonderfully…Thank You So Much!!!
Best Regards,
Eldon E. Ballenger Jr.
SID MERRILLL (verified owner) –
Excellent customer service!
William Campbell (verified owner) –
worked just great for me
robert t. (verified owner) –
I fixed holes in the bottom of a boat with the product. I learned about this product from the Aluminum-Weld youtube channel. I do some soldering on copper pipe and welding at basic level. This product worked great. I did cover the welds with an epoxy filler just so it would look nice after painting. Someone who is better at brazing/welding/grinding will probably be able to get a smooth surface just with the rods. The boat is a family heirloom. I am glad to get it back in the water and fish with my kids.
William D. (verified owner) –
The aluminum-weld was highly effective and a reasonable price. The service was prompt and I received the product within a few days. Highly recommend!
Mark I. (verified owner) –
Super helpful. Talked directly to owner and videos on youtube are great.
john (verified owner) –
great communication and fast shipping thank you
Herman (verified owner) –
I repaired 3 holes in bottom of 18 foot Jon boat. Product works great, used map gas, and wire brush to clean. 100% pleased. Thank You.
John U. (verified owner) –
Worked great to fix cracks in aluminum canoe.
David B. (verified owner) –
Benjamin a. Harris jr. (verified owner) –
Ronald B. (verified owner) –
Excellent service and follow up with questions – highly recommended! Thanks/
James Mac Gregor (verified owner) –
It works just like u said and showed on line highly recommend lm not even a welder thank u
James Bittle (verified owner) –
Got it fixed
James N. (verified owner) –
This was my first attempt at a prop repair. After watching two short YouTube videos, these are my before and after photos. The entire process was quite easy to do. I used a 4 inch grinder with 60 and 280 grit paper. I highly recommend this rod and will be ordering more.
Tyler O. (verified owner) –
THESE ARE AWESOME.
Adolph P. (verified owner) –
The order of the brazing rods came pretty quick with in a week of purchasing them online and usually take couple of weeks living here in alaska. I purchased after looking online from one of the posts and wanted to try them out. Living here in alaska we use the riveted aluminum lund boats all summer long and on 3 rivets that had a little crack on the boat sure helped a lot! No more leaks and will be purchasing more in the future when i need them!
GARY W FROSCH (verified owner) –
Very Good at Repairing Pontoons.
Larion Yoder (verified owner) –
Decker Dunn (verified owner) –
rob (verified owner) –
Great product, and had it shipped to Canada and it got here in a reasonable amount of time!
Michael G. (verified owner) –
Sean McCarthy (verified owner) –
Great company snd great product
Robert (verified owner) –
Worked great fixed crack in boat just take your time and remember low heat
Tim (verified owner) –
Work very well
Richard K. (verified owner) –
Don (verified owner) –
I bought the product primarily to repair the bottom of an aluminum boat and it performed exactly as promised. No complaints! But before doing that, however, as a test, I tried joining two 1/8 inch plates together perpendicularly (following the printed instructions) and was disappointed when they broke apart will very little effort. I called the 800 number, explained what I’d done (and how) and got some tips on how to improve the “weld”. I followed the advice and got a far superior result, so technique has a lot to do with it. The fact that the product works and that they are there to help has me sold on the product and the company.
Max (verified owner) –
Used it to seal up small holes on my Jon boat. Very easy to use and works great.
Steven Meyer (verified owner) –
Excellent product. Worked as prescribed and extremely easy and clean finish.
Chad Geetter (verified owner) –
Gary Pace (verified owner) –
Works good, tried it a
On a little piece fast and good a little bit different on a pontoon laying on your back . The pontoon sure does suck up the heat.
Randy Camp (verified owner) –
It worked great for 4 inch sprinkler pipe repair
Scott Kerr (verified owner) –
Have not used the rods yet but am very pleased with the transaction and fast service and shipping!
Eric b. (verified owner) –
Very quick service by phone and deliver.thanks
Keith A. (verified owner) –
Brian N. (verified owner) –
I had a 5 mm hole on the bottom of my aluminum boat. I used an aluminum pop rivet to close the hole and then applied the aluminum rod while using a propane torch. Excellent job in welding the pop rivet to the boat.
Michael Ball (verified owner) –
I was going to use the rods to repair an aluminum pontoon. Unfortunately I could not get the plug out. If I heated the pontoon and sealed the hole, the pontoon would have imploded as it cooled.
I will use the rods another day on another project.
willie h. (verified owner) –
nice product . it worked well for my project
victor (verified owner) –
great product, fast shipping , no hassle
Mark F. (verified owner) –
Worked perfectly for the hole in my pontoon log! So happy I found this product. Very easy to use.
Craig Hart (verified owner) –
Recently purchased this product for a pontoon repair. And did as advertised.
Debroh Konarski (verified owner) –
This is exactly what you are looking for!! Amazing experience from the initial contact with the owner.
I didn’t find a TS8000 so I couldn’t follow manufacturer recommendations; product still did the job! Aluminum swim raft is still floating and dry.
BEST GOOGLE SEARCH EVER!!
Richard Schluchter (verified owner) –
Quick turn around. Haven’t used the product yet.
Jamie Newman (verified owner) –
It was easy to use I bought a map gas torch didn’t have any problems. It worked great
Martin Kirk (verified owner) –
Great Product. Worked Perfectly repaired a hole in an Aluminum boat. Heat is the key.
Beau (verified owner) –
Worked like a charm!!
Heat the surface not the rod and no issues. Highly recommended!!!!!!
Darren Kahler (verified owner) –
Was very happy with how the 8 HTS-735 II worked on the bottom of your pontoon, we had a small issue with a seam and this was the perfect product for it Easy Peasy If you can solder your golden
Brian Braithwaite (verified owner) –
Jeff Miller (verified owner) –
Used to fill over holes in pontoon railing and repair some broken rails . I also filled a puncture in one of my pontoons . Really simple to use once you get the heat to 735 degrees .
Frank Dedonatis (verified owner) –
Works as advertised. Had a pin hole in my pontoon log. Drained gallons of water prior to fix. Used the product, 5 hrs on the bay….not a drop of water!
Michal Caldwell (verified owner) –
Worked as advertised. Used to repair a pontoon boat pontoon.
Pete Destefano (verified owner) –
Constance Robinette (verified owner) –
We were please with the quick delivery of item
Randy Fisher (verified owner) –
super fast delivery rods worked great for me
Archie Sawyer (verified owner) –
William S. (verified owner) –
There is a little learning curve, but I made a good repair to a small hole in the bottom of my aluminum Jon boat. Smoothed it out with a dremel and painted it. Seems like a strong weld.
Anonymous (store manager) –
Here’s a picture of the welding I did inside my 1986 Smoker craft boat with your welding rods.
Thanks for your help getting this job done.
Steve (verified owner) –
Needed to repair a few cracks in aluminum boat, product did great. Had good instructions in package and videos online.
LAURENCE STAPLES (verified owner) –
Great product. Much better than sticking a rivet in a hole.
David K. (verified owner) –
Love this stuff. Ok so I am the dumbass who took their boat out on the river when it was too low. Finding a prop that matches can be difficult. I tinned the back side first, this is a must! I also used Oxy / Acetylene with a number 4 rosebud. It got hot enough in seconds. Be careful with the heat, aluminum will melt away in seconds if you hold the torch in one place too long.
As you can see in the pictures this rod filled 2 large chunks and a crack on another blade. I only used 2 1/2 rods. Great stuff!
Donald (verified owner) –
Kevin williams (verified owner) –
Connie King (verified owner) –
I am repairing a bracket on an pontoon boat. I have not used it yet but i am sure it will work for what i am doing.
Kirk Kudrna (verified owner) –
Daniel Clark (verified owner) –
Joseph B. (verified owner) –
Works as expected- Follow the instructions
boyd addy (verified owner) –
works great !
Nicholas (verified owner) –
Worked great! I’m very impressed that the product shipped the same day. They arrived just in time. 10/10 will order again.
Jerry R. (verified owner) –
Very easy to do , did holes on a 12 ft aluminum boat
Matthew Pancake (verified owner) –
Excellent, fixed my outdoor water heater!
Robert St. Louis (verified owner) –
This stuff is great! I used it to repair a leaky galvanized funnel (see photo), and it works wonderfully on aluminum (although I am not yet able to braze aluminum cans, gotta get better at heat control for those).
Cody (verified owner) –
Great product with great customer service!
Anonymous (verified owner) –
Really impressed with how fast the order arrived. This is exactly what I wanted and it was helpful to have the recommended guidance of the videos to make sure it was applied correctly.
Steve D. (verified owner) –
Worked as stated. Delivered on time. Would have been nice to get some extra rod for the price.
Greg Allen (verified owner) –
An expensive perfect work liked advertised all fixed ready for the lake
Larry (verified owner) –
I started out using a propane torch. I thought I was getting my pontoon hot enough because it was melting the rod. I could not get my hole patched. I finally switched to map gas and within seconds I got my hole patched. I was nervous using map gas but I did it anyway. I live on a lake with all my neighbors having pontoon boats. I’m going to order more rods just in case of an emergency.
Doug B. (verified owner) –
James Bennett (verified owner) –
Product performs 100% as advertised…..Remarkable Results!
William C. (verified owner) –
Worked great! on patching up a hole
on my canoe. I am sure glad I did not use JB weld. I been down that road before.
Maureen B. (verified owner) –
We used the brazing rods to solder a whole in a seam in a pontoon on our boat. Two weeks in the water and the patch is holding. The entire experience has been very good; from ordering to receiving and the actual product.
david williams (verified owner) –
They worked great. Filled the holes and cracks I had. Buying more to do the other side.
Kerry White (verified owner) –
Perfect Seller…..Perfect Product…A +++++
John B. (verified owner) –
Had a 1/8″ hole in my aluminum canoe. Couldn’t get it hot enough with my propane torch, so after watching a youtube video I used map gas and it worked great. Seems like a strong permanent patch.
John G. (verified owner) –
Stefan –
I had to fix four 4-6 in cracks on the bottom of my jonboat. The material is excellent but there is a learning curve. Even with the experience of working with my hands and with with a variety of materials, it took a little time to learn and get used to it. There are some points to keep in mind and that can come in handy:
1) 25 rods may be enough for a job as the one I described as long as you have some previous experience with using this; otherwise, do yourself a favor and order at least 50 from the get go, so that you avoid having to wait for the arrival of a second shipment
2) it is worth having the working area level and avoid working upside down. Since the heat rises, it will be harder to control it on the surface of the metal and is more likely to cause warping of the aluminum. Although the rods can be used upside down and vertically, the heat and flow of the material as much harder to control
3) in order for the rod alloy to stick to the aluminum, they both need reach a certain temperature. Melted rod material, will NOT stick to aluminum if the aluminum is not hot enough
4) cracks can happen to the added rod alloy due to expansion and contraction. This is easily fixed by incorporating new material. When adding new material the temperature will not need to be as high since you are only melting rod alloy to patch it on top of existing rod alloy. Also, a thicker layer of rod alloy definitely helps prevent cracking as the material cools.
5) the alloy oxidizes fast, turning dull grey within a few hours. If you need to add another layer after a longer interval, you will need to prep the area again remove the oxide.
H Munro (verified owner) –
Greg D. (verified owner) –
Pontoon log repair. Reinforced some previous welds that were showing signs of minor leakage. Fortunately, It was in a non-pressurized center toon cavity and I was able to access the weld from inside/above to put gravity on my side. Worked great, took a while to heat, but once the proper temp was reached i was very successful. Not sure could have done from below looking up! Thank you.
gerald (verified owner) –
Saved my aluminum boat, it had some pitting that actually made it through the hull. HTS-735 ll worked very well, way better than the previous brand I had bought. Great product.
Anonymous (verified owner) –
Charles Bevins (verified owner) –
They worked exactly as advertised.
Gregory W. B. (verified owner) –
You did weld. Sorry I couldn’t help myself. Satisfied.
Victor Folen (verified owner) –
Daniel (verified owner) –
I have not used it yet l have a pontoon boat now I have the rod in the event I developed a leak
Donald (verified owner) –
Was easy to fix the crack in the bottom if my aluminum boat.
Glenn S. (verified owner) –
Excellent product and service
Milton Ramirez (verified owner) –
Luigi F. (verified owner) –
Used it to weld a hole in my 12 ft aluminum boat. Worked as advertised. Thanks again.
Verified Buyer (verified owner) –
Easy-to-use and bonds really well.
Very Important to watch the instructional video and follow the techniques and guidelines to a “T”.
Do this and you will be very pleased with the outcome.
Phillip Stafford (verified owner) –
Was very satisfied
Anonymous (verified owner) –
Arrived in a timely manner. Have not used them yet
harry papadopoulos (verified owner) –
Fast delivery awesome product thank you
Andrea Deason (verified owner) –
Charles S. (verified owner) –
I haven’t used the welding rods yet at this time but the shipment was great ,they came in protective tube and were not destroyed through shipment. They are also decent size rods not like ones I have bought somewhere else.I’m sure they will work great .time will tell
Jose V. (verified owner) –
Great product,plan to buy more.
Donald Siau (verified owner) –